Optimization of Wash Bath Temperature for Effective Biopolishing of Textile Garments

Authors

  • Samaraj Subramanian Thiyagarajan Thermo Fischer Scientific
  • K. Hari Coimbatore, India

Abstract

Over the past several decades, various methods have been used by the garment industry to enhance the value of their products. The primary method has been through the use of chemicals. In the t-shirt manufacturing industry, the predominant method for adding value has been biopolishing. Pilling in cotton garments can negatively affect the appearance and durability of the garments. Improving the drapability and increasing the durability of the garments at low cost had gained traction as an alternative to the costly mercerizing process. Cellulase, a naturally occurring product made from microorganisms, has been beneficial for this use. Removing fuzz and making the fabric pill resistant is one of the main applications of microbial cellulase. Identifying an optimum wash bath temperature for biopolishing, and subsequent processing, will provide a strong economical reason for the garment processing industry to adopt this value-adding process.

Author Biographies

  • Samaraj Subramanian Thiyagarajan, Thermo Fischer Scientific
    Scientist Manufacturing Sciences
  • K. Hari, Coimbatore, India
    Department of Microbiology, Sugarcane Breeding Institute

Downloads

Published

2014-12-09

Issue

Vol. 9 No. 1 (2014): Convergence in Fashion, Aroma & Odor, Fashion & Textiles in Brazil, Arab World, Terri Towel, Biopolishing, UV Protection

Section

Peer Reviewed Article

License

By submitting a manuscript, the authors agree that the copyright of all materials published in Journal of Textile and Apparel Technology and Management (JTATM) is transferred to the publisher if and when their manuscript is accepted for publication. Please note the following details as an understanding for submitting a manuscript to JTATM for publication.
Authors grant rights to JTATM to disseminate the paper and its contents as a file on the Internet when the paper is accepted. JTATM owns an exclusive right for the paper until it is either rejected or published. The authors cannot submit the same paper in part or in its entirety to another journal during the review.
Authors retain rights to be identified as the authors when the paper is published, and the patent right or rights relating to products or processes described in the paper. The authors retain rights to the educational and research uses of the paper, such as teaching and exchange of the published or pre-publication version of the paper with colleagues, for non-commercial purposes. The authors may obtain permission from the journal for a non-exclusive use of the contents in the paper, such as tables, figures and texts, with a proper acknowledgement to the journal.
Authors must warrant the originality of the paper in that the contents of the paper in part or in full have not been published or submitted elsewhere while the paper is under review.
Effective date for the above policies is December 1, 2010. The authors of the papers published before this date will be contacted via email for copyright transfer agreements.